| Customization: | Available |
|---|---|
| After-sales Service: | Technical Support |
| Principle: | Ultrasonic |
|
Still deciding? Get samples of US$ 290/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Ultrasonic level meter is based on the Time-of-Flight principle. A sensor emits ultrasonic pulses, the surface of the media reflects the signal and the sensor detects it again. The Time-of-Flight of the reflected ultrasonic signal is directly proportional to the distance traveled. With the known tank geometry the level can be calculated.
Ultrasonic level meter for continuous level measurement of liquids or bulk solids. Typical applications are the measurement of liquids in storage tanks or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or open containers. The non-contact measuring principle is independent of product features and allows a setup without medium.
| Function | Compact Type |
| Level Range | 4,6,8,10,12,15,20,30m |
| Accuracy | 0.5%-1.0% |
| Resolution | 3mm or 0.1% |
| Display | LCD Display |
| Analog Output | Two Wires 4-20mA/250Ω Load |
| Power Supply | DC24V |
| Environmental Temperature | Transmitter -20~+60ºC , Sensor -20~+80ºC |
| Communication | HART |
| Protection Class | Transmitter IP65(IP67 Optional),Sensor IP68 |
| Probe Installation | Flange, Thread |
1. Keep Ultrasonic Level Transmitter perpendicular to liquid.
2. The transducer should not be mounted too close to the tank wall, the bracket can cause strong false echoes
3. Mount the transducer away from the inlet to avoid false echoes.
4. The transducer should not be mounted too close to the tank wall, the build-up on the tank wall cause false echoes.
5. As is illustrated by the figure on the below, the transducer should be mounted on the top of guide tube to prevent the false echoes from turbulence and foam. The guide tube should come with a vent hole at top of the tube to allow the liquid vapor go out of the tube.
6. When you mount the transducer on the solid tank, the transducer must point to the tank outlet.
){kind=link}