Pulse Output Low Cost CO2 Propane Gas Intelligent Precession Vortex Flowmeter

• Customization: Available
• Accuracy: >±1%
• Main Application: Nature Gas
• Model NO.: ATLU
• Sensor: Plug-in
• Application: Industrial Production
• Type: Vortex Flow Meter
• Measuring Media: Gas
• Measuring Principle: Electrical Principles
• Measurement Object: Closed Pipeline
• Certification: CE, ISO
• Power Supply: 24VDC+3.6V Battery Powered
• Working Pressure: 1.6MPa, 2.5MPa, 4.0MPa, 6.3MPa and etc.
• Ambient Temperature: -30 ~+65 Degree
• Pipe Material: Carbon Steel, Stainless Steel, Plastic, etc
• Output Signal: 4-20mA, Pulse, RS-485
• Ingress Protection: IP65
• Transport Package: Carton Box with PP Film Wooden Box
• Origin: China
• HS Code: 9026801000
• Production Capacity: 500 Piece/ Week
• Package Size: 50.00cm * 50.00cm * 40.00cm
• Package Gross Weight: 10.000kg
• Lead Time: 15 days (1 - 1 Pieces) ; To be negotiated ( > 1 Pieces)

Product Description

Product Description

Intelligent precession vortex flowmeter is a new type of gas flow meter developed by Aister Instrument. The flowmeter integrates the function of flow, temperature and pressure detection, and can automatically compensate the temperature, pressure and compression factor. It is an ideal instrument for gas measurement in petroleum, chemical industry, electric power, metallurgy and other industries.

The flow profile of the flow sensor is similar to the profile of a venturi tube. A set of helical vane is arranged on the inlet side. When the gas flow enters the flow sensor, the vane forces the flow to produce a violent vortex flow. When the gas flow enters the diffusion section, the vortex flow begins to rotate twice under the action of backflow, forming a gyroscopic vortex precession phenomenon.
The precession frequency is proportional to the flow rate and is not affected by the physical properties and density of the flow, and the detection element can measure the secondary rotational precession frequency of the fluid to obtain good linearity in a wide flow range. The signal is amplified, filtered, and transformed into a pulse signal proportional to the flow rate by the preamplifier, and then sent to the microprocessor for integration processing together with the temperature, pressure and other detection signals, and the measurement results are displayed on the LCD screen (instantaneous flow, cumulative flow, temperature and pressure data).

The smart precession vortex flowmeter consists of the following seven basic components:
1. Vortex generator
2. Shell
3. Intelligent flowmeter integrator
4. Temperature sensor
5. Pressure sensor
6. Piezoelectric crystal sensor
7.Disrotator

Product Parameters

Performance	Technical parameter
Diameter(mm)	20	25	32	50	80	100	150	200
Flow range(M³/h)	1.5~15	3~30	6~60	10~150	28~400	80~900	150~1800	360~3600
Accuracy	1.0~1.5%
Repeatability	Less than 1/3 of the basic error limit
Working pressure(Mpa)	1.6Mpa,2.5Mpa,4.0Mpa,6.3Mpa;Special pressure can consult customer service
Use environment	Ambient temperature:-30ºC~+65ºC
	Relative humidity:5%~95%
	Medium temperature:-20ºC~+80ºC
	Atmospheric pressure:86Kpa~106Kpa
Operating voltage	24VDC+3.6V battery powered, removable battery
Output signal	4-20mA,pulse output,RS485,alarm output
Applicable medium	All gases (except those with corrosion and moisture)
Explosion-proof mark	ExiaIIT6Ga

Detailed Photos

Products Size

Caliber  (mm)	Length (mm)	PN1.6~4.0MPa
		H	Dφ	Kφ	N	L	dφ	H	Dφ	Kφ	N	L	dφ	H	Dφ	Kφ	N	L	dφ
25	200	305	115	85	4	14	65
32	200	320	140	100	4	18	76
50	230	330	165	125	4	18	99
80	330	360	200	160	8	18	132
		PN1.6MPa						(Special requirements) PN2.5~4.0MPa
100	410	376	220	180	8	18	156	390	235	190	8	22	156
150	570	430	285	240	8	22	211	450	300	250	8	26	211
		PN1.6MPa						PN2.5MPa						(Special requirements) PN4.0MPa
200	700	470	340	295	12	22	266	490	360	310	12	26	274	510	375	320	12	30	284

Model Selection

1.  Measure the medium, temperature, whether the medium is corrosive
2.  Flow range and inside diameter of user pipe
3.  Pressure rating
4.  Whether to display on site
5.  Working power supply
6.  Signal output, communication type
7.  Whether need explosion-proof
8.  Installation type
9.  Accuracy level

Installation Instructions

Certifications

        Q: How long is your delivery time?
        A: it depends on the quantity. Normally it's about a week to two weeks.

        Q: How to get quotation?
        A: Please tell us the pipe diameter, measuring medium, flow rate, temperature, pressure, connection type and accuracy of the product you need, we will choose the most suitable product for you.

        Q:can i design our own logo or color ?
        A:sure ! we are glad to help you.

        Q:Can I place a small order for the first time?
        A:YES. This shows your recognition of us, I believe we will have longer-term cooperation.