SS316 NPT Thread Water Turbine Flow Transmitter 4-20mA Output Sensor Factory Price

• Customization: Available
• Accuracy: >±1%
• Main Application: Water, Diesel Fuel, Fuel Oil
• Model NO.: ATWY
• Application: Industrial Production
• Type: Turbine Flow Meter
• Measuring Media: Liquid
• Measuring Principle: Electrical Principles
• Measurement Object: Closed Pipeline
• Certification: CE, ISO
• Caliber: DN15 - 200
• Signal Output Function: Pulse Signal, 4-20mA Signal
• Temperature of Medium: -20~+120 Degree
• Communication Signal: RS485 Communication, Hart Protocol,
• Ambient Pressure: 86kpa - 106kpa
• Transport Package: Carton Box with PP Film Wooden Box
• Origin: China
• HS Code: 9026800000
• Production Capacity: 50000 PCS / Year
• Package Size: 50.00cm * 50.00cm * 40.00cm
• Package Gross Weight: 10.000kg
• Lead Time: 15 days (1 - 1 Pieces) ; To be negotiated ( > 1 Pieces)

Product Description

Product Description

Liquid turbine flowmeter is a kind of precision flow measuring instrument, which can be used to measure the flow and total amount of liquid with the corresponding flow integrating instrument. Liquid turbine flowmeters are widely used in measurement and control systems in petroleum, chemical industry, metallurgy, scientific research and other fields. Liquid turbine flowmeters with sanitary fittings can be used in the pharmaceutical industry.

Turbine flowmeter is a kind of speed instrument, which has the advantages of high precision, good repeatability, simple structure, high pressure resistance, wide measuring range, small size, light weight, small pressure loss, long life, simple operation, easy maintenance, etc., used to measure the volume flow and accumulation of low viscosity, no strong corrosion and clean liquid in closed pipelines. It can be widely used in petroleum, chemical industry, metallurgy, organic liquid, inorganic liquid, liquefied gas, urban gas pipe network, pharmaceutical, food, paper and other industries.


 

Product Parameters

Executive standard	Turbine flow sensor(JB/T9246-1999)
Connection mode	Thread, clamp, flange, clamp type
Accuracy	±1%R,±0.5%R,±0.2%R (to be customized)
Sensor material	304, 316 stainless steel, etc
Use conditions	Medium temperature:-20ºC~+120ºC  Ambient temperature:-20ºC~+60ºC
	Relative humidity:5%-90%         Atmospheric pressure:86Kpa~106Kpa
Signal output function	Pulse signal, 4-20mA signal
Communication output function	RS485 communication, HART protocol, etc
Working power supply	External power supply: 24VDC±15%, ripple ≤±5%, suitable for 4-20mA output, pulse output, RS485, etc
	Internal power supply: 1 set of 3.6V10AH lithium battery, the battery voltage can work normally at 2.0-3.0V
Signal line interface	Basic model: Hausmann connector or three-core cable; Explosion-proof type, internal thread M20*1.5
Explosion-proof class	Exia II CT or Exd II BT6
Protection class	IP65 or higher customizable

Detailed Photos

 

 

Installation Instructions

1. Requirements for the straight pipe section: The flowmeter must be installed horizontally on the pipeline (the inclination of the pipeline is within 5), and the flowmeter axis should be concentric with the pipeline axis when installed, and the flow direction should be consistent. The length of the upstream pipe of the flow meter should be not less than 2D equal straight pipe section, if the installation site is sufficient, it is recommended that the upstream straight pipe section is 20D and the downstream is 5D.
2. Requirements for bypass pipes: In order to ensure that the normal use of the medium is not affected when the flow meter is repaired, a cut-off valve (stop valve) should be installed on the front and back pipes of the flow meter, and a bypass pipe should be set up. The flow control valve should be installed in the downstream of the flow meter, and the stop valve installed in the upstream when the flow meter is used must be fully opened to avoid the unsteady flow of the upstream part of the fluid.
3. Requirements for the external environment: When the flow meter is installed indoors, it must be installed outdoors, and it must use sun protection and rain protection. Lightning protection measures to avoid affecting the service life.
4. Requirements for impurities in the medium: In order to ensure the service life of the flow meter, a filter should be installed in front of the straight pipe section of the flow meter.
5. Installation location: The flowmeter should be installed in a place that is easy to maintain and free from strong electromagnetic interference and thermal radiation
6. Requirements for installation and welding: The user has another pair of standard flanges welded on the front and back pipes. Welding with flow meter not allowed! Before installing the flow meter, the welding slag and other dirt in the pipe should be strictly removed, and the pipe of equal diameter (or by-pass pipe) should be used to replace the flow meter for purging the pipe. To ensure that the flow meter is not damaged during use. Installation flow time, flange between the sealing gasket can not be concave into the pipeline.
7. Flowmeter grounding requirements: the flowmeter should be reliably grounded and cannot be shared with the ground wire of the strong current system.

 

 

Model Selection

 

 

Certifications

 

 

        Q: How long is your delivery time?
        A: it depends on the quantity. Normally it's about a week to two weeks.

        Q: How to get quotation?
        A: Please tell us the pipe diameter, measuring medium, flow rate, temperature, pressure, connection type and accuracy of the product you need, we will choose the most suitable product for you.

        Q:can i design our own logo or color ?
        A:sure ! we are glad to help you.

        Q:Can I place a small order for the first time?
        A:YES. This shows your recognition of us, I believe we will have longer-term cooperation.